Deep-drawn shells for handpan makers.
Top and bottom shells in Ember Steel®, stainless AISI 430 and DC04 nitrided, plus the tools and supplies to build with them. What you see in stock is what's on the shelf right now.
Choose your steel.
Each steel is below with its batches, prices and what is in stock. Click one to jump there.


Ember Steel®
An exclusive stainless steel: more controlled sustain, a ceramic sound, stable notes. From two factories with their own character.


Stainless AISI 430
The first type of stainless in handpans. A 1 mm thick shell, top and bottom, with much more sustain than nitrided shells.


DC04 · final stock
We have stopped making DC04, raw and nitrided. What is left is listed below while it lasts; it won’t be restocked.
All prices are per shell and exclude VAT. Outside the EU, or inside the EU with a valid VAT number, we don't charge VAT. Inside the EU without a VAT number, 21% VAT is added. Orders of 100 shells or more get € 6 off every shell.
Ember Steel®
An exclusive stainless steelAfter years of research on many materials, we found a stainless alloy that checks all our boxes: sustain, clarity, ceramic sound, workability, stability and rust protection.
Annealing. Works best annealed between 350 and 650 °C; each batch responds a little differently. Each temperature gives its own colour: gold, ember red, dark purple, even blue.
Open to every maker. Any maker building on Ayasa Ember Steel® may carry the Ember Steel® trademark.
| Shell | < 100 | 100+ |
|---|---|---|
| Top | € 62 | € 56 |
| Bottom | € 81 | € 75 |


Batches in stock
Click a factory card above to dim the other factory. Not sure which batch? Compare batches ·
All Ember Steel® batches side by side.
One row per certificate number, one dot per batch in stock. Tap a dot to compare.
Selected: E#34 (A) · order this batch · without numbers: E#20 (A), E#23 (B)
Stainless AISI 430
The first type of stainless in handpansThe first type of stainless in handpans. A 1 mm thick shell, top and bottom, with much more sustain than nitrided shells.
| Shell | < 100 | 100+ |
|---|---|---|
| Top | € 62 | € 56 |
| Bottom | € 81 | € 75 |


Batches in stock
DC04 · final stock
The steel most handpans are made ofMost handpans are made of DC04. These are our last shells, at the prices below while they last.
Our nitriding recipe. Fine-tuned since 2014 with our hardening partner in the Netherlands. It does not infringe PANArt's patent.
| Shell | < 100 | 100+ |
|---|---|---|
| Nitrided top | € 25 | € 19 |
| Nitrided bottom | € 65 | € 59 |


Batches in stock
Outlet
Seconds and scrapShells with surface marks, not structural issues: fully usable for building, at a lower price. Perfect for makers who polish their shells, or beginners who need some material to test.
| Ember Steel® | AISI 430 | DC04 | |
|---|---|---|---|
| Tuning-ring diameter | 530 mm | 530 mm | 530 mm |
| Total diameter (incl. flange) | 556 mm | 560 mm | 552 mm |
| Flange width | 13 mm | 13 mm | 11 mm |
| Height | 130 mm | 130 mm | 130 mm |
| Shell thickness | 0.9–1.0 mm | 0.9–1.0 mm | 0.9–1.0 mm |
| Port (bottom shells) | ø 82 × 19 mm | ø 82 × 19 mm | ø 82 × 19 mm |
Tools and supplies for your build.
Tools and supplies ship together with a shell order. Two exceptions: a set of tuning rings, or a full box of Merbenit. All prices exclude VAT.
Tuning rings
A thick top ring, a thin top ring and a bottom ring, with hardened M14 bolts. Fits our shells.
Specs
- Fits
- Our shells: inner Ø 530 mm (Ember Steel®, AISI 430, DC04)
- Thick top ring
- 15 mm
- Thin top ring
- 10 mm
- Bottom ring
- 10 mm
- Bolts
- 8 × M14×25 mm and 8 × M14×20 mm, hardened
- Ships
- In its own box; can be ordered without shells
Why three rings
Every ring combination adds its own frequencies, which can make some notes hard to read in your tuning software. We tune with the thick top and the bottom ring, and switch to the thin top ring when a note won’t read. Thick top + bottom: B4 and F#3 can be hard. The two thin rings: A4.
In a truck tyre
We tune with the rings in a 275/70R22.5 truck tyre, for 13 years now: less metal means fewer ghost frequencies, the tyre works as a sound chamber, and you stand straight. Sore back? Change the tyre’s height.
Before first use
Tap the threads and run the bolts in with proper tools and cutting oil. Turn the bolts in by hand first; if one sticks, tap again.
Tuning hammer
Fully assembled CNC stainless hammer with nylon heads and a rubber grip.
- Body
- CNC-machined stainless steel, two 10 mm threads
- Heads
- CNC-machined nylon, front and back
- Handle
- 22 mm stainless pipe, rubber grip
- Comes
- Fully assembled
Good to know
The nylon heads wear in time; spare heads are for sale too.
Taxi hammer
For loosening notes and rough tuning.
- Faces
- Black rubber, yellow plastic
- Handle
- Wood
- Use
- Loosening and rough tuning
Good to know
We mostly use the black rubber side: it loosens and tunes with hardly any dents. The yellow side helps now and then but can scratch and dent; tape on it helps.
Tuning stick
An Innovative Percussion stick to settle notes while you tune.
- Stick
- Innovative Percussion
- Extra
- A custom-cut rubber square, so it can’t roll off the table
- Use
- Stabilising notes
Good to know
A few hard strikes and the note settles at its stable tuning.
Tuning magnets
Mute the tone fields you’re not working on, so you hear one at a time.
- In the set
- 20 magnets in 6 sizes, one colour per size
- Covers
- About 6 to 9 semitones per magnet
- Placing
- Big cut-outs: put them inside the shell, no scratches outside
Good to know
The colours make the right size quick to find.
Merbenit HS60 glue
The glue makers have trusted for over 20 years. We’ve glued only with Merbenit since 2013.
- Box
- 12 tubes; a full box can be ordered without shells
- Track record
- No case known where it lost grip
Good to know
We recommend it to every maker.
Phoenix Oil
The best rust protection we know that doesn’t cost sustain. 99.5% natural, fresh scent.
- Made of
- 99.5% natural ingredients
- Use
- On every shell after cleaning, and on every instrument before it ships
Good to know
Oil every instrument before it ships, so it can’t rust on the way, and give each customer a bottle with instructions: fewer rusted instruments come back for repair.
Boxes, pallets or pick-up.
Boxes of 11
Tops and bottoms can't be mixed freely and still travel safely, so there are two kinds:
Shipping cost
€50 to €250, depending on where you are and the weight. Signed in, your order page shows an estimate to your address before you order.
Pallets from 30 shells
Saves on shipping and packing. Orders of 100 shells or more get € 6 off every shell.
Pick up in Almere
Collect your shells at our workshop in Almere, the Netherlands.
How would you like to order?
Sign in
We email you a 6-digit code, no password. Then order from what is in stock, on invoice.
Sign in to orderRequest an account
Tell us who you are. We answer within one working day; your first orders ship once paid.
Request an account